catalog - IVEP, a.s.
Transkript
catalog - IVEP, a.s.
CATALOG 050/03/2013 SHORT-CIRCUIT TEST STAND for voltages of up to 1000V TYPE ZSI ISO 9001:2009 ISO 14001:2005 GENERAL The ZSI test stand is used for holding or controlling a tested LV device during the short-circuit or tempearture rise tests. STANDARDS AND REGULATIONS The ZSI test stand meets the requirements of ČSN EN 60647-1, ed.3:2005; ČSN EN 61439-1:2010 and ČSN EN 62271-1:2009, as well as other related standards. OPERATING CONDITIONS The ZSI test stands are intended for to be used in indoor operating environment, under normal operating conditions as defined by the ČSN EN 62271-1:2009 standard, i.e.: The highest ambient temperature Lowest ambient temperature Altitude + 40°C - 15°C up to 1000 m The average relative humidity measured during a period of 24 hours should not exceed 95%. Vibration caused by external impact or earthquake are irrelevant and can be neglected. Special operation conditions may be agreed between the manufacturer and the client, however, these need to be agreed upon with the manufacturer in advance. TEST STAND SPECIFICATION The ZSI test stands consist of the following main parts: test stand frame made from Al profiles, chassis (with wheels or screwed-on feet), basic distribution board, connecting bars, insulation barriers, and control mechanism to control the tested LV devices. The dimensioning of the incoming busbars and holders corresponds with the customer requirements. The base plate is made from glass-fibre reinforced synthetic resin bonded fabric. The base plate is provided with another auxiliary and replaceable plate used to hold the tested specimen, which can be perforated in case of need. MAIN ENGINEERING DATA Highest voltage Rated frequency Number of poles Number of short-circuiting jumpers Short-circuit capacity for the ZSI 800 type Short-circuit capacity for the ZSI 2000 type Ambient temperature Protection degree Weight: the ZSI 800 type Weight: the ZSI 2000 type 1000 V 50 Hz 4 2 40 kA/1s; inrush current of 100kA 150 kA/0.2 s; inrush current of 375kA -20°C ... 40°C IP00 350 kg 400 kg 2 050/03/2013 BASIC COMPONENT PARTS OF THE TEST STAND ZKRATOVACÍ PAS HORNÍ = SHORT-CIRCUITING UPPER BAR; RÁM ZKUKŠEBNÍ STOLICE = TEST STAND FRAME; HORNÍ PASY = UPPER BARS; IZOLAČNÍ PŘEPÁŽKY = INSULATION BARRIERS; ZÁKLADOVÁ DESKY = BASE PLATE; MECHANISMUS SPÍNAČE JISTIČE = CIRCUIT BREAKER SWITCHING MECHANISM; JISTIČ (NENÍ SOUČÁSTÍ DODÁVKY) = CIRCUIT BREAKER (NOT INCLUSIVE OF THE TEST STAND DELIVERY); DOLNÍ PASY = LOWER BARS; 3 050/03/2013 Vyrábí a dodává: Manufactured and supplied by: IVEP, a.s. Vídeňská 117a, 619 00 Brno, Czech Republic Phone: +420 547136 654 e-mail:[email protected] Telefax: +420 547136 402 http:// www.ivep.cz 4 050/03/2013
Podobné dokumenty
stáhnout katalog
and drop tests to IEC 980 and ČSN EN 60068-2,
vibrations up to the mass of 50 kg, acceleration up to
100g, frequency 8 - 1000 Hz, drop mass up to 50 kg,
acceleration up to 40 g
Official verificatio...