SCM-i.MX 6Dual Module - Fact Sheet

Fact Sheet
SCM-i.MX 6Dual
Introducing the world’s smallest single chip
system module
Target Applications
Overview
• Digital signage
Freescale single chip system modules are a suite of highly integrated products in an ultra-
• Human-machine interface
small form factor. The first member of this portfolio, the Freescale SCM-i.MX 6D, drastically
• Home energy management
reduces time to market by providing a solution that minimizes design time. We’ve integrated
systems
and validated dual-core processor, the power management system, flash memory and over a
• In-flight entertainment
hundred passive system components all in a chip the size of a dime. The SCM-i.MX 6Dual is
• Intelligent industrial control
enabled with the standard i.MX 6D security features (high assurance boot, cryptographic cipher
systems
engines, random number generator and tamper detection) as well as enhanced system-level
• IP phones
tamper prevention.
•IPTV
The SCM-i.MX 6D speeds and eases development time by addressing technology challenges
• Portable medical
such as design of DDR, power management and board support package (BSP). Our single
•Smartbooks
chip module i.MX 6D consists of the i.MX 6Dual applications processor, PF0100 (PMIC) for
• Point-of-sale devices
power management, 16 MB SPI NOR, over one hundred discrete components, and is enabled
• Smart watches
for 1 or 2 GB LPDDR2. In addition, a fully tested board support package (BSP) enabled in
• Home audio systems
Android™ and Linux® is available.
• Secure smart connected devices
SCM-i.MX 6Dual Block Diagram
SCM-i.MX 6Dual Block Diagram
OTP Startup Configuration
Power Generation
Switching Regulators
OTP Prototyping
(Try Before Buy)
Voltage
Sequence and
Timing
Phasing and
Frequency Selection
SW1A/B/C
(0.3 to 1.875 V)
Configurable 4.5 A or
2.5 A+2.0 A
Bias and References
SW2
(0.4 to 3.3 V, 2 A)
Internal Core Voltage Reference
Linear Regulators
System Control
VGEN1
(0.8 to 1.55 V, 100 mA)
Smart DMA
Regulator Control
SW3A/B
(0.4 to 3.3 V)
Configurable 2.5 A or
1.25 A+1.25 A
Current Limit
VGEN5
(1.8 to 3.3 V, 100 mA)
SW4
(0.4 to 3.3 V, 1 A)
VGEN6
(1.8 to 3.3 V, 200 mA)
Boost Regulator
(5 to 5.15 V, 600 mA)
USB OTG Supply
VSNVS
(1.0 to 3.0 V, 400 µA)
RTC Supply with Coin Cell
Charger
Fault Detection and Protection
Thermal
VGEN4
(1.8 to 3.3 V, 350 mA)
Multimedia
Short Circuit
PWM x4
3D
2D
Power Management
Temperature
Monitor
Audio
ASRC
Imaging Processing Unit
RAM
ROM
TrustZone
Secure RTC
Ciphers
eFuses
MMC 4.4/
SDXC
MIPI HSI
UART x5,
5 Mbps
I2C x3,
SPI x5
Inversion/Rotation
Display and Camera Interface
HDMI and PHY
24-bit RGB, LVDS (x2)
MIPI DSI
20-bit CSI
PCIe 2.0
(1-lane)
FlexCAN x2
1Gb Ethernet
+ IEEE 1588
3.3 V GPIO
Keypad
USB2 OTG
and PHY
USB2 Host
and PHY
MIPI CSI2
Reference resistors, bulk capacitors, and decoupling capacitors
1 or 2 GB LPDDR2
(Designed for and available as PoP configuration for assembly)
S/PDIF
Tx/Rx
NAND Cntrl.
(BCH40)
Image Enhancement
Security
Security Cntrl.
USB2 HSIC
Host x2
ESAI, I2S/SSI
x3
Video Codecs
Resizing & Blending
MMC 4.4/
SD 3.0 x3
Vector Graphics
1080p30 Enc/Dec
Internal Memory
RNG
16 MB SPI NOR FLASH
Hardware Graphics Accelerators
Watch Dog x2
Power
Supplies
PTM per core
1 MB L2-Cache + VFPv3
IOMUX
VGEN3
(1.8 to 3.3 V, 100 mA)
32 KB D-cache
per core
NEON per core
Timer x3
Logic and Control
I2C Communication and Registers
32 KB I-cache
per core
Clock and Reset
DDR Voltage Reference
Parallel MCU Interface
ARM® Cortex®–A9 core
PLL, Osc
VGEN2
(0.8 to 1.55 V, 250 mA)
Connectivity
CPU Platform
Secure JTAG
S-ATA and
PHY 3Gbps
The i.MX 6Dual family encompasses a dualcore ARM® Cortex®-A9 platform running up to
800 MHz per core with 1 MB of L2 cache and
64-bit LPDDR2 support. Integrated FlexCAN,
Ethernet Controller, SDIO, USB, PCI Express®
SCM-i.MX 6Dual Features and Benefits
Features
Benefits
Majority of the components integrated inside the
module
Speeds time to market—50% faster than the
average development time
Reduces hardware design time
and SATA-2 provide board options for device
level connectivity while integration of dual
Unprecedented, ultra-small form factor
(17 x 14 x 1.7 mm)
>50% reduction over discrete solutions
Software and firmware available and fully optimized
for the SCM
Reduces software design time and validation effort
industrial multimedia applications.
Enabled LPDDR2 PoP memory and embedded
power management
Reduces design complexity of integrating and
certifying DDR memory and power management
The PF0100 SMARTMOS Power
Freescale, with its partners, and ecosystem,
provide SW/HW customization and support
Reduces supply chain complexity and improves
time to market
LVDS ports, MIPI display port, MIPI camera
port and HDMI v1.4 provides versatility to
address the user interface requirements
across a wide range of consumer and
Management Integrated Circuit (PMIC)
provides a highly programmable/ configurable
architecture, with fully integrated power
devices and minimal external components.
With up to six buck converters, six linear
SCM-i.MX 6Dual Software
Support
regulators, RTC supply and coin-cell charger,
The software solution is Linux and Android
the PF0100 can provide power for a complete
based leveraging the i.MX 6 series general
system, including applications processors,
available (GA) BSP. The GA provides software
memory and system peripherals, in a wide
components: tool suite, boot loader, Linux
range of applications while requiring only a
kernel and root file system. The 16MB SPI
single external supply.
NOR flash is sized to support the storage of
uboot, Linux kernel image, and an optimized
Other components in the system include 16
MB SPI NOR flash and over one hundred
discrete components, which are key system
capacitors and unique current reference
resistors for the i.MX 6Dual. Additionally, the
SCM-i.MX 6Dual is enabled for 1 or 2 GB
LPDDR2 as a PoP configuration for assembly.
SCM-i.MX 6Dual Ecosystem
Freescale has collaborated with over 10
different companies to bring this platform to
market. These companies include engineering
designers, component suppliers and
manufacturing partners.
Linux OS.
The SCM-i.MX 6Dual in comparison to a
standard US dime.
SCM-i.MX 6Dual Technology
Inside
• Freescale i.MX 6Dual processor based on
ARM Cortex-A9, operating up to
800 MHz
• Freescale MMPF0100 for power
management
• 109 discrete components
• 16 MB SPI NOR
• 1 or 2 GB LPDDR2 enabled for assembly
Software customization services, hardware
design services, and PoP assembly services
will be available through the partners in the
ecosystem.
For more information, please visit freescale.com/scm
Freescale and the Freescale logo are trademarks of Freescale Semiconductor, Inc., Reg. U.S. Pat. & Tm. Off. All other product or
service names are the property of their respective owners. ARM, Cortex and TrustZone are registered trademarks of ARM Limited (or
its subsidiaries) in the EU and/or elsewhere. NEON is a trademark of ARM Limited (or its subsidiaries) in the EU and/or elsewhere. All
rights reserved. © 2015 Freescale Semiconductor, Inc.
Document Number: SCMIMX6DUALFS REV 0