Save product as PDF

electronic technology equipment
www.abetec.eu
Tester of ESD wristbands and footwear COMBO TESTER
Order no.
201100133
Manufacturer:
MaaB
Description
The Combo tester is a checking device designed for testing protective grounding wristbands, wristband leads,
and antistatic footwear utilised at antistatic workplaces in dedicated area according the EN 61 340-5-1 standard.
The standard specifies daily check of the wristbands and footwear qualification.
Highlights
Universal application.
High accuracy.
Low consumption.
Easy installation.
Favourable price.
Resistance of applied wristbands is specified in the range of 7.5×105 Ω to 3.5×107 Ω by the standard.
Resistance of their intake conductors equals 7.5×105 Ω to 5×106 Ω. Limits for applied footwear used like a
basic protection equal 5×104 Ω to 1×108 Ω. If the footwear used like an additional protection, the resistance
limits of applied footwear equal 5×104 Ω to 1×108 Ω.
Particular inputs of the Combo tester are set to these limits. Measured values are indicated optically and
acoustically. The device indicates correct value of the wristband resistance with the help of green pilot light and
sounding hooter. Erroneous values including HIGH or LOW deviation direction determination are indicated by red
pilot lights. Battery discharge is indicated by yellow pilot light. The device calibration is accomplished with the
help of the “Calibre for Combo tester” or another appropriate instrument.
Technical parameters
Dimensions: 190 × 150 × 55 mm.
Weight: 470 g.
Power supply: 9 V battery.
Consumption: 12 mA max. at the test.
Operating temperature: 0 to 55 °C.
Stand height: 900 mm.
Size of contact surface: 450 × 300 mm.
ABE.TEC, s.r.o., č. p. 43, CZ - 53003 Ostřešany | DIČ/VAT CZ25992333 | tel.: +420 466 670 035 | [email protected]
generated
13.10.2016 Má pouze informativní charakter.
source:http://www.abetec.eu/en/eshop/product/tester-of-esd-wristbands-and-footwear-combo-tester/
Resistance limits and tolerances
Input
Lower limit
Upper limit
Protective wristband
7,5×105 ± 2,5×104Ω
3,5×107 ± 1×106Ω
Wristband feed
7,5×105 ± 2,5×104Ω
5×106 ± 1,5×105Ω
Basic footwear
5×104 ± 1×104Ω
3,5×107 ± 1×106Ω
Additional footwear
5×104 ± 1×104Ω
1×108 ± 3×106Ω
Combo tester is situated in a plastic box. Input bushing terminals for checked wristbands, cables and contact
plate are situated at the front side. Alternative connecting buttons are located on the instrument upper panel.
Evaluating indicators of the test and battery status are on the upper panel. Contact button from stainless steel is
situated in the centre of the upper panel.
Technical data
Name of value:
Value
Rozsah rezistance měřených náramků
7,5 x 10^5 Ω ~ 3,5 x 10^7 Ω
Rozsah rezistance měřených kablíků
7,5 x 10^5 Ω ~ 5 x 10^6 Ω
Rozsah rezistance měřené obuvi (ZO)
5 x 10^4 Ω ~ 3,5 x 10^7 Ω
Rozsah rezistance měřené obuvi (DO)
5 x 10^4 Ω ~ 1 x 10^8 Ω
Indikace naměřené hodnoty
optická, akustická
Chybné hodnoty včetně určení směru odchylky
HIGH, LOW
Výška stojanu
900 mm
Nášlapná plocha
jednoduchá
ABE.TEC, s.r.o., č. p. 43, CZ - 53003 Ostřešany | DIČ/VAT CZ25992333 | tel.: +420 466 670 035 | [email protected]
generated
13.10.2016 Má pouze informativní charakter.
source:http://www.abetec.eu/en/eshop/product/tester-of-esd-wristbands-and-footwear-combo-tester/
Rozměr nášlapné plochy
450 x 300 mm
Zobrazení naměřené hodnoty
ne
Pracuje samostatně (bez PC)
ano
Rozměry (š x h x v)
190 x 150 x 55 mm
Hmotnost
0.47 kg
Power
bateriové 9V
Spotřeba
12 mA při testu
Operating temperature
0 - 55 °C
Photo gallery
Optional accessories
Accessories
ABE.TEC, s.r.o., č. p. 43, CZ - 53003 Ostřešany | DIČ/VAT CZ25992333 | tel.: +420 466 670 035 | [email protected]
generated
13.10.2016 Má pouze informativní charakter.
source:http://www.abetec.eu/en/eshop/product/tester-of-esd-wristbands-and-footwear-combo-tester/