EHP SERIES Characteristics
Transkript
EHP SERIES z z z z 105℃ 2000 hours assured life. Directly mountable on printed circuit board without holders. Smaller low profile sizes than ordinary capacitors. Aluminum case designed explosion‐proof vent. Characteristics Voltage Range Capacitance Range Temperature Range Capacitance Tolerance Leakage Current Dissipation Factor (tanδ) ( at 20℃, 120Hz ) 16 ~ 100V 160 ~ 450V 470 ~ 47000uF 330 ~ 2200uF -40 ~ +105℃ -25 ~ +105℃ ±20% at 120Hz , 20℃( 10% Tol. is available upon request) I =3 CV uA max C: Capacitance, V:W.V. (After 5 minutes) Less than the value under table (%) 10 ~ 16 25 ~ 35 50 ~ 63 80 ~ 100 160 ~ 250 uF \\ W.V. 47 ~ 390 470 ~3900 4700~8200 10000~22000 27000~47000 25 35 40 45 20 30 35 40 20 30 30 35 15 20 25 15 15 350 ~ 450 20 20 Stability at Low Temperature Impedance ration at 120Hz between the -25℃ or -40℃ value and 20℃ value shall not exceed : 16 25 400 450 35~100 160~200 250~350 Rated Voltage (V) 5 4 4 4 4 8 8 Z-25℃/Z 20℃ 15 15 12 Z-40℃/Z 20℃ The following specifications shall satisfied when the capacitors are restored to 20℃ after rated Load Life working voltage applied for 2,000 hours at max. operating temperature with the rated ripple current. Capacitance change ≦±20% of the initial value. Dissipation factor ≦±200% of the initial specified value Leakage current ≦The initial specified value. After storage for 1000 hours at 105℃ with no voltage applied, the capacitor shall meet the specified Shelf Life limit in load life. Diagram of dimensions Multiplier for R.C. vs Temparature Temp.(℃) Multiplier 45 2.10 60 1.90 85 1.40 95 1.25 105 1.00 10K 1.48 1.35 1.25 50K - 100K 1.53 1.38 1.28 Multiplier for Ripple Current VS Frequency Cap.(uF)\\ (Hz) 10<Cap.≦100 100<Cap.≦1000 1000<Cap. 40 60 0.8 0.8 0.8 120 1 1 1 1K 1.36 1.25 1.17 EHP SERIES Standard Products Table W.V(DC) 16 25 35 50 63 80 100 CAP. (µF) 6800 10000 15000 22000 33000 47000 4700 6800 10000 15000 22000 33000 3300 4700 6800 10000 15000 22000 2200 3300 4700 6800 10000 15000 2200 3300 4700 6800 10000 1000 1500 2200 3300 4700 6800 470 680 1000 1500 2200 3300 4700 Ripple Current A max. 105℃, 120Hz 2.02 2.79 3.24 4.08 4.83 6.32 1.92 2.60 3.50 4.58 5.12 6.09 1.84 2.42 3.24 3.96 4.69 5.50 1.65 2.24 2.95 3.26 4.11 5.05 1.65 2.48 3.43 4.64 5.75 1.16 1.74 2.25 3.30 4.29 5.66 0.79 1.02 1.38 1.83 3.03 4.59 5.43 Dimensions A Dψ L 22 22 22 25 30 35 22 22 22 25 30 35 22 22 22 25 30 35 22 22 22 25 30 35 22 22 25 30 35 22 22 22 30 30 35 22 22 22 22 25 30 35 30 30 50 45 45 45 25 30 40 45 45 50 25 30 40 45 45 50 30 35 45 50 50 50 35 50 50 50 50 35 40 50 50 50 50 25 30 35 45 50 50 50 Dimensions B Dψ L Dimensions C Dψ 25 25 30 35 25 40 40 35 30 25 35 35 35 30 25 35 35 35 30 25 30 40 40 40 30 30 40 40 40 30 30 35 45 40 40 30 30 25 40 40 40 - 30 35 - 25 25 30 35 30 - 25 25 25 35 35 30 - 25 25 30 35 30 - 25 25 25 30 35 30 - 25 25 30 35 35 - 25 25 30 35 L 30 30 - 41 EHP SERIES Standard Products Table W.V(DC) 160 200 250 350 400 450 42 CAP. (µF) 330 470 680 1000 1500 2200 220 330 470 680 1000 1500 220 330 470 680 1000 100 150 220 330 470 47 68 100 150 220 330 470 47 68 100 150 220 330 470 Ripple Current A max. 105℃, 120Hz 0.98 1.21 1.64 2.15 2.80 3.39 0.92 1.21 1.62 2.04 2.70 3.43 1.00 1.28 1.76 2.22 2.80 0.69 0.82 1.00 1.35 1.70 0.56 0.72 0.82 0.98 1.21 1.57 1.98 0.60 0.80 0.90 1.05 1.24 1.64 1.70 Dimensions A Dψ L 22 22 22 25 30 35 22 22 22 25 30 35 22 22 22 25 35 22 22 22 30 35 22 22 22 22 25 30 30 22 22 22 22 25 30 35 25 35 45 45 50 50 25 35 40 40 45 50 30 40 50 50 45 30 40 50 40 40 25 25 35 45 40 50 50 25 35 40 50 50 50 50 Dimensions B Dψ L Dimensions C Dψ 25 25 30 35 - 25 40 40 40 - 25 25 30 35 30 30 30 35 30 25 30 40 40 30 35 25 25 30 35 30 35 30 35 25 30 50 40 45 30 30 25 40 35 45 - 35 - 25 25 30 30 40 35 - 25 25 25 30 35 30 35 - 25 25 25 35 35 35 - 25 25 25 30 L 25 30 30 30 30 40 -
Podobné dokumenty
elp series
Directly mountable on printed circuit board without holders.
Smaller low profile sizes than ordinary capacitors.
Terminal spacing fixed at 10mm for PC board plug in.
Aluminum case designed explosio...
DMA 1 - METTLER TOLEDO
Hodnota modulu může být použita pro výpočet ztrátového faktoru (tanδ), který odpovídá poměru M‘‘ k M‘.
Zcela elastické materiály mají ztrátový faktor 0, zatímco
zcela viskózní materiály mají ztráto...
Prospekt jako soubor
EU-příčnou trubkou 42 mm přední, Posudek EU je platný a výrobek lze namontovat pouze spolu s výrobkem
11E4013 nebo 11E4113, SiCa / DoCa / XtCa
EU-horizontal Pipe 42 mm front, EU-certificate is vali...
Digitální wattmetr
infrazařízení), jednoduchost vysílače i přijímače a v neposlední řadě i kompatibilita s jinými zařízeními
pro sluchově postižené.
Technické údaje
Napájecí napětí: