docMANUFACTURING TECHNOLOGY
download 
Stížnost Podobné dokumenty
![23RBDM10_OVERALL[1].](http://s1cz.doczz.net/store/data/000353934_1-b0e47731403fef7b6c8d9e3dcbf4d16e-70x70.png "23RBDM10_OVERALL[1].")
Wings for Life 2
Železná houba ze Žďáru nad Sázavou ve světle problematiky
locally 13.0 ± 0.7 % P: hardness 995 ± 48 HV0.1), the second consisted of ferrite and pearlite (0.2÷0.3
% C; phosphorus content as in area I). The area III is a mixture of pearlite, phosphorus–rich...
Nabídka studijních předmětů
Solid state phase transformation; Transformations at tempering; Recovery and
recrystallization processes; Interfaces and grain boundaries and their role at phase
transformations and deformation pr...
Manufacturing Technology | Volume 16 | Year 2016 ISSN 1213-2489
Influence of Laser Shock Peening Surface Treatment on Fatigue Endurance of Welded Joints Ján Lago, Mario Guagliano, František Nový,
from S355 Structural Steel
Otakar Bokůvka
Radek Lattner, Františe...
Articles List Manufacturing Technology | Voume 13 ISSN 1213-2489
Experimental Verification of the Relation between the Surface Roughness and the Type of
Used Tool
Coating
Experimental Verification of FEM Simulation of GMAW Bead on Plate Welding
příloha 1 k osvědčení
AASS (Acetic Acid Salt Spray
Test):
CSN EN ISO 9227, ASTM G85,
CASS (Copper Accelerated
Acetic Acid Salt Spray Test):
CSN EN ISO 9227,
DIN E 13(j9'229
Articles List Manufacturing Technology | Volume 14 | Year 2014
Influence of Cutting Conditions and Grinding Wheel Wear on Barkhausen Noise of
Ground Surfaces
MANUFACTURING TECHNOLOGY
Prof. Milan Brožek, MSc., Ph.D.
CULS in Prague, Czech
Prof. František Holešovský, MSc., Ph.D.
chairman, JEPU in Usti n. Labem
Prof. Jiří Hrubý, MSc., Ph.D.
VSB TU in Ostrava
Prof. Karel Jandečka, M...
