Instruments and Control - Fakulta strojní - VŠB-TU Ostrava

VYSOKÁ ŠKOLA BÁŇSKÁ - TECHNICKÁ UNIVERZITA OSTRAVA
FAKULTA STROJNÍ
KATEDRA AUTOMATIZAČNÍ TECHNIKY A ŘÍZENÍ
Proceedings of XXXth Seminary ASR'05
Instruments and Control
Ostrava, April 29, 2005
XXX. ASR '2005 Seminar, Instruments and Control, Ostrava, April 29, 2005
Programme Committee
T. ÁDAM
J. BALÁTĚ
R. FARANA
C. IRGENS
K. JARACZ
C. KLIMEŠ
F. KOLIBA
K. KOSTÚR
Š. KOZÁK
J. PLUTA
T. SALOKY
B. SAPINSKI
L. SMUTNÝ
M. ŠEDA
I. ŠVARC
I. TAUFER
V. VAŠEK
A. VÍTEČEK
F. ZEZULKA
TU Miskolc, Hungary
DAAAM CZ President, FT UTB Zlín
FS VŠB - TU Ostrava
University of Strathclyde, United Kingdom
Pedagogic Academy Krakow, Poland
OU Ostrava
Silesian University of Opava, OPF Karviná
TU Košice, F BERG, Slovakia
FEI STU v Bratislavě
University of Mining and Metallurgy, Krakow, Poland
TU Košice FME Prešov, Slovakia
University of Mining and Metallurgy, Krakow, Poland
FS VŠB - TU Ostrava
FSI VUT v Brně
FSI VUT v Brně
University of Pardubice
FT UTB Zlín
FS VŠB - TU Ostrava
FEKT VUT v Brně
Organizing Committee
M. BABIUCH, R. FARANA, V. KEBO, P. KOČÍ, L. LANDRYOVÁ,
L. SMUTNÝ, J. ŠKUTA, R. WAGNEROVÁ
Secretary Office
Department CSI (KATŘ-352), VŠB-TU Ostrava
av. 17. listopadu 15, 708 33 Ostrava - Poruba
+420 59 732 1280
+420 59 691 6129
[email protected]
http://www.fs.vsb.cz/akce/2005/ASR2005/Welcome.htm
Proceedings Editors
Farana, R., Smutný, L. & Kočí, P.
ISBN 80-248-0774-2
2
XXX. ASR '2005 Seminar, Instruments and Control, Ostrava, April 29, 2005
3
Table of Contents
Aging Characteristics of Green-emitting Zn2GeO4:Mn Alternating-current Thin-film
Electroluminescent Devices ..................................................................................................... 11
AHMED, Mustafa, M.A.
Future Prospect towards a Customer-Driven Approach in Egyptian Higher Education
Intuitions................................................................................................................................... 19
AHMED, Riham
What Can We Expect In ASP.NET 2.0? .................................................................................. 31
BABIUCH, Marek
Implementation of C Language and ASIX Modules into the Programming of PIC
Microcontrollers
Implementace jazyka C a modulů ASIX do programování mikrokontrolérů PIC .................. 39
BALŠÁNEK, Miroslav
The View of Control Charts Used in Various Situations within the Framework of
Statistical Process Control and Their Application in Excel
Přehled regulačních diagramů pro různé situace v rámci statistické regulace procesu a
možnost jejich aplikace ............................................................................................................ 49
BOHUŠ, Michal & KOPP, Petr
The Program “Cutting Pattern”
Program „Řezné schéma“......................................................................................................... 53
DLOUHÁ, Dagmar
The Optimization of Modules for M68HC08
Optimalizace modulů pro M68HC08 ....................................................................................... 61
DOLEŽEL, Petr & VAŠEK, Vladimír
Modernization of Laboratory of Recycling Technology
Nové vybavení laboratoře recyklačních technologií ............................................................... 67
DOLINAY, Jan & VAŠEK, Vladimír
Computer Interpretation of Hearing Loss Based on Fowler Method
Počítačová implementace vyšetření sluchu založená na Fowlerově metodě ........................... 75
DOLINAY, Viliam, VAŠEK, Vladimír & ZLÍNSKÝ, Vladimír
Assembly Language Program Portability between Incompatible CPUs
Přenositelnost programů v jazyce symbolických adres mezi nekompatibilními procesory..... 79
DOSTÁLEK, Petr & VAŠEK, Vladimír
Towards Manufacturing Firm Sustainability through a Framework of Total Management
Quality (TMQ) Version of Total Quality Management (TQM) Articulated for Developing
Countries – a Case Study in Egypt ........................................................................................... 89
EL-ARABY, Sherif, IRGENS, Christopher & ABDEL GHANY, Mona
XXX. ASR '2005 Seminar, Instruments and Control, Ostrava, April 29, 2005
4
Investigating the Applicability of Adopting HACCP System in Egyptian Food Processing
Industry Organisations ............................................................................................................105
EL-ARABY, Sherif, IRGENS, Christopher & LABIB, Ashraf
Dielectric Properties of Butadiene Oligomers ........................................................................113
EL-FAKHRI, Salem
Application of Mobile Robots in Inter–operational Transport
Aplikácia mobilných robotov v medzioperačnej doprave ......................................................117
ELIAŠ, Jozef & SALOKY, Tomáš
Department and Faculty Information Systems Developed at the Department CSI VSB-TU
Ostrava
Informační systémy katedry a fakulty budované na katedře ATŘ VŠB-TU Ostrava.............125
FARANA, Radim
Innovations of Microsoft Visual Basic .NET 2005 language
Inovace v jazyce Visual Basic .NET 2005..............................................................................155
FOJTÍK, David
Intelligent Field Instruments and FDT/DTM Standard
Inteligentní polní instrumentace a FDT/DTM standard..........................................................163
FORMÁNEK, Ivo
Uncertainty and Vagueness of Reasoning ..............................................................................169
GALLOVÁ, Štefánia
Testing of the Repeated Accuracy of Positioning of the Plasma Cutting Head .....................175
HALAJ, Martin, GROS, Peter & KUREKOVÁ, Eva
Comparison of Two Clustering Methods in Image Segmentation..........................................183
HORVÁTH, Juraj & ZOLOTOVÁ, Iveta
The Model of Supplying Working Places with Material at the ČSA Mine
Model zásobování materiálem a důlní výstroji na Dole ČSA.................................................189
JENDRYŠČÍK, Miloš
Modelling of Selective Mining and Homogenisation at Deep Mines
Modelování selektivního odtěžení a homogenizace na hlubinných dolech............................197
JENDRYŠČÍK, Miloš & BURÝ, Alois
Control of Dynamics of SPM Probes for Non-destructive Defectoscopy ..............................209
KALA, Jaroslav
Development and Implementation of Intranet in Industrial Company
Vývoj a implementace intranetu v průmyslovém podniku .....................................................217
KEDROŇ, Ivan & PAVLAS, Roman
Computer - aided Analysis of Electrical Measurements Accuracy ........................................223
KLATIL, Pavel
XXX. ASR '2005 Seminar, Instruments and Control, Ostrava, April 29, 2005
5
Auto-Detection of the Sensors Discredibility in Control Loop via Evolutionary
Algorithms .............................................................................................................................. 231
KLIMÁNEK, David & ŠULC, Bohumil
Noise Measurement
Měření hluku ......................................................................................................................... 239
KOČÍ, Petr
Algorithms of Machine Learning in Robot Navigation
Algoritmy strojového učenia v navigácií robotov .................................................................. 245
KOSTÍK, Ľuboš & SALOKY, Tomáš
Modeling of the Cell Structures of Robotized Systems ......................................................... 251
KOVÁČ, Jozef, LÍŠKA, Ondrej & PEČOVSKÁ, Karin
Application of Cognitive Model of Visual Attention in Automatic Assembly...................... 257
KOVÁČ, Jozef, MADARÁSZ, Ladislav, LÍŠKA, Ondrej & ANDOGA, Rudolf
Taking Advantages of Virtual Computers in Education ........................................................ 265
KULHÁNEK, Jiří
Measurement of Quick Temperature Process upon a Test of Metal Materials ...................... 269
KULHÁNEK, Jiří & TOMČÍK, Petr
Using the Discrete Wavelet Transforms for De-noising in DSP............................................ 277
KUPCZAK, Marek
Flight Control of Unmanned Aerial Vehicle and Models of Control..................................... 287
LENČÁK, Peter & LÍŠKA, Ondrej
FOTOM – a System for Photogrammetrical Image Analysis
FOTOM – systém pro fotogrammetrickou analýzu obrazu.................................................... 295
LIČEV, Lačezar & PAJUREK, Ivo
SQL Based Fuzzy Control...................................................................................................... 305
MACHULA, Pavel
Perspective of Using Simulation Methods ............................................................................. 311
MAKOVNÍK, Radoslav & LÍŠKA, Ondrej
Energy Parameters Control of the Cogeneration Units with Combustion Engine
Riadenie parametrov kogeneračnej jednotky so spaľovacím motorom ................................. 315
MAXIM, Vladislav & BOSÁK, Martin
Modification of Symmetric Optimum Method....................................................................... 319
MIZERA, Roman
Advances Models Laboratory Web Support .......................................................................... 325
MORAES, Flavio Santos & MIZERA, Roman
IIdentification of Phenomena in Tundish by Means of Non-standard Model
Identifikace dějů v mezipánvi pomocí nestandardního modelu ............................................. 331
MORÁVKA, Jan & MICHALEK, Karel
XXX. ASR '2005 Seminar, Instruments and Control, Ostrava, April 29, 2005
6
Opencast Mining Technology Visualization and Control ......................................................345
NEUSTUPA, Zdeněk
Using SSL for Secure Domain Name System (DNS) Transactions .......................................351
PFEIFER, Gert, FETZER, Christof & JIM, Trevor
Voice-command Control System ............................................................................................359
PLUTA, Marek
Signal processing in Python
Zpracování signálů v jazyce Python .......................................................................................369
POPEK, Jiří & TŮMA, Jiří
Development of Statistical Model of the Three-coordinate Monitoring System of Rocket
Projectile .................................................................................................................................377
RUSAKIEVIČ, Anton & STÝSKALA, Vítězslav
Adaptive Control of Heating Process with Outdoor Temperature Compensation .................383
SALOKY, Tomáš & PITEĽ, Ján
Project of Laboratory of Systems with Artificial Intelligence................................................387
SALOKY, Tomáš & ŠEMINSKÝ, Jaroslav
Instrumentation and Program Support of Laboratory Hot-air Stand
Přístrojová a programová podpora modelu teplovzdušného agregátu....................................391
SMUTNÝ, Lubomír
Web Content Management System and their Application in Portal e-Automatizace
Webové redakční systémy a jejich aplikace v portálu e-Automatizace..................................397
SMUTNÝ, Pavel
Management of Industry Led Collaborative Student Projects................................................405
STONE, Angela, YAN, Xiu & ION, Bill
Distributed Data Mining and Data Warehouse.......................................................................417
SZAPPANOS, Tibor, ZOLOTOVÁ, Iveta & LANDRYOVÁ, Lenka
Progress of Design Theory......................................................................................................427
ŠEMINSKÝ, Jaroslav
Control and Monitoring of Alarm Using PIC16F84A Micro-controller
Ovládání a monitorování alarmu pomocí PIC16F84A ...........................................................433
ŠKUTA, Jaromír
Monitoring Users Activities
Monitorování aktivit uživatelů................................................................................................437
ŠREK, Petr
Using flocking Algorithm and Voronoi Diagram for Motion Planning of a Swarm of
Robots
Plánování pohybu skupiny robotů pomocí flocking algoritmu a Voroného diagramů...........449
ŠVEC, Petr
XXX. ASR '2005 Seminar, Instruments and Control, Ostrava, April 29, 2005
7
Development and Implementation of a Strategy for Effective Distributed Collaborative
Design in SME’s..................................................................................................................... 457
THOMSON, Avril, STONE, Angela, GRANT, Richard & SHIELDS, Adrian
Identification Coefficient of „Diffusion“ on Gassy Mine ...................................................... 469
VANČURA, Vladislav
Experimental Plant Identification by Relay Method .............................................................. 479
VÍTEČKOVÁ, Miluše & VÍTEČEK, Antonín
Feature Analysis of Selftuning PI Level Control in a Cascade of Tanks............................... 491
VRÁNA, Stanislav & ŠULC, Bohumil
Hot-Air Aggregate Control Design ........................................................................................ 501
WAGNEROVÁ, Renata
An Approach to a Web-based Flexible Workflow Modeling ................................................ 507
WANG, Dongbo, YAN, Xiu-Tian, WILLIAM, J. Ion, WANG, Runxiao & TONG, Xufeng
Smart Sensors and Wireless Networks
Inteligentní senzory a bezdrátové sítě .................................................................................... 519
WOJCIASZYK, Petr
Information Technology Supports Process Management....................................................... 529
WOLF, Petr, VESELÝ, Ivo, WOLF, Jan & MACHULA, Pavel
XXX. ASR '2005 Seminar, Instruments and Control, Ostrava, April 29, 2005
9
Preface
„Seminář ASŘ“ (Seminary of Automatic Control Systems), organized on Faculty of
Mechanical Engineering by Department of Control Systems and Instrumentation at
cooperation with Committee of Applied Cybernetics and Informatics - KAKI Ostrava,
achieved on this year 2005 honorable serial number thirty.
Seminaries ASR demonstrate as important Workshops every year their fixed position at
large offer of science-research actions with international range and with reputable special
even social level. Workshop „Seminary ASR“ was markedly signed on this times as an
effective platform for meeting of teachers and Ph.D. students from VŠB-Technical University
of Ostrava with specialists from other universities of Czech Republic, Slovakia, Poland,
Hungary and other countries, even with specialists from industrial companies and next
institutions. On 2005 year is organized two parts of Seminary ASR: the first one is Student
competition - STOČ 2005“ as a Student Science Workshop and the second part is traditional
XXXth Seminary ASR as a Ph.D. seminary and competition.
Goals of Seminary ASR´04 "Instruments and Control" are presentation of R&D project
results, reciprocal interchange of participant's information, experiences and retrieval of
possibilities for cooperation on common projects, main with Ph.D. students. The next goal of
this Seminary ASR is to introduce the wider specialized public, experts and scientific workers
from universities, research institutions, industry, design and supply organizations with the
most up-to-date knowledge from the areas of automation, measuring, diagnostic and control
systems, program systems for control, SCADA/HMI systems, CAD, and other areas, and to
provide an exchange of experience.
The main topics of Seminary ASŘ´2005 "Instruments and Control" are
•
The methods and algorithms of automatic control
•
Modeling and simulation of control elements and systems
•
Measuring and diagnostic systems
•
The means of automation devices
•
Program support of control and diagnostic systems
•
Applied informatics (Computer Science)
The new line of international conferences ICCC were established at 1999 year with
partner technical universities - TU Košice (faculty BERG), AGH Krakow (faculty FMIR)
University of Miscolz and VŠB-TU Ostrava (faculties FME and MGF). This year Conference
will be held on May 2005 at Miscolz – Lilafüred with a name "ICCC´2005 - International
Carpathian Control Conference". This migratory action is periodical held by cooperation
faculties from Poland, Slovakia, Czech Republic and new from Hungary and on 2006 year
they will be run at the Czech Republic VŠB – TU Ostrava.
PROF. DR. RNDR. LUBOMÍR SMUTNÝ
Chairman
DOC. ING. RADIM FARANA, CSC.
Co-Chairman
Ostrava, April 29, 2005
XXX. ASR '2005 Seminar, Instruments and Control, Ostrava, April 29, 2005
533
Author index
A
ABDEL GHANY, Mona, .................... 89
AHMED, Mustafa, M.A., .................... 11
AHMED, Riham,................................. 19
ANDOGA, Rudolf,............................ 257
B
BABIUCH, Marek,.............................. 31
BALŠÁNEK, Miroslav, ...................... 39
BOHUŠ, Michal, ................................. 49
BOSÁK, Martin,................................ 315
BURÝ, Alois, .................................... 197
K
KALA, Jaroslav, ................................209
KEDROŇ, Ivan, .................................217
KLATIL, Pavel, .................................223
KLIMÁNEK, David,..........................231
KOČÍ, Petr, ........................................239
KOPP, Petr, ..........................................49
KOSTÍK, Ľuboš, ................................245
KOVÁČ, Jozef, ..........................251, 257
KULHÁNEK, Jiří, .....................265, 269
KUPCZAK, Marek, ...........................277
KUREKOVÁ, Eva, ............................175
D
DLOUHÁ, Dagmar, ............................ 53
DOLEŽEL, Petr,.................................. 61
DOLINAY, Jan,................................... 67
DOLINAY, Viliam,............................. 75
DOSTÁLEK, Petr,............................... 79
L
LABIB, Ashraf,..................................105
LANDRYOVÁ, Lenka, .....................417
LENČÁK, Peter, ................................287
LIČEV, Lačezar, ................................295
LÍŠKA, Ondrej,..........251, 257, 287, 311
E
EL-ARABY, Sherif, .................... 89, 105
EL-FAKHRI, Salem, ......................... 113
ELIAŠ, Jozef, .................................... 117
M
MADARÁSZ, Ladislav, ....................257
MACHULA, Pavel,....................305, 529
MAKOVNÍK, Radoslav,....................311
MAXIM, Vladislav, ...........................315
MICHALEK, Karel,...........................331
MIZERA, Roman,......................319, 325
MORAES, Flavio Santos, ..................325
MORÁVKA, Jan,...............................331
F
FARANA, Radim, ............................. 125
FETZER, Christof, ............................ 351
FOJTÍK, David, ................................. 155
FORMÁNEK, Ivo, ............................ 163
G
GALLOVÁ, Štefánia,........................ 169
GRANT, Richard,.............................. 457
GROS, Peter, ..................................... 175
H
HALAJ, Martin,................................. 175
HORVÁTH, Juraj,............................. 183
ION, Bill, ........................................... 405
I
IRGENS, Christopher,................. 89, 105
J
JENDRYŠČÍK, Miloš, .............. 189, 197
JIM, Trevor,....................................... 351
N
NEUSTUPA, Zdeněk,........................345
P
PAJUREK, Ivo,..................................295
PAVLAS, Roman,..............................217
PEČOVSKÁ, Karin, ..........................251
PFEIFER, Gert, ..................................351
PITEĽ, Ján, ........................................383
PLUTA, Marek, .................................359
POPEK, Jiří........................................369
R
RUSAKIEVIČ, Anton, ......................377
XXX. ASR '2005 Seminar, Instruments and Control, Ostrava, April 29, 2005
S
SALOKY, Tomáš,......117, 245, 383, 387
SHIELDS, Adrian, .............................457
SMUTNÝ, Lubomír,..........................391
SMUTNÝ, Pavel,...............................397
STONE, Angela, ........................405, 457
STÝSKALA, Vítězslav,.....................377
SZAPPANOS, Tibor,.........................417
Š
ŠEMINSKÝ, Jaroslav, ...............387, 427
ŠKUTA, Jaromír, ...............................433
ŠREK, Petr, ........................................437
ŠULC, Bohumil, ........................231, 491
ŠVEC, Petr, ........................................449
T
THOMSON, Avril, ............................457
TOMČÍK, Petr, ..................................269
TONG, Xufeng,..................................507
TŮMA, Jiří.........................................369
V
VANČURA, Vladislav,......................469
VAŠEK, Vladimír,.............61, 67, 75, 79
VESELÝ, Ivo, ....................................529
VÍTEČEK, Antonín ...........................479
VÍTEČKOVÁ, Miluše .......................479
VRÁNA, Stanislav,............................491
W
WAGNEROVÁ, Renata, ...................501
WANG, Dongbo, ...............................507
WANG, Runxiao,...............................507
WILLIAM, J. Ion, ..............................507
WOJCIASZYK, Petr,.........................519
WOLF, Jan, ........................................529
WOLF, Petr,.......................................529
Y
YAN, Xiu, ..........................................405
YAN, Xiu-Tian, .................................507
Z
ZLÍNSKÝ, Vladimír, ...........................75
ZOLOTOVÁ, Iveta,...................183, 417
534
Web: http://www.fs.vsb.cz
Av. 17. listopadu 15
Ostrava-Poruba, CZ - 708 33
Czech Republic
Phone (+420) 59 - 732 1280
Fax (+420) 59 - 691 6129
Email: [email protected]
Department of Control
Systems and
Instrumentation
DEPARTMENT
PROFILE
FACULTY OF MECHANICAL ENGINEERING
VŠB – TECHNICAL UNIVERSITY
OF OSTRAVA
Automatic Control
Applied Informatics
Mechatronic Systems
The Department is a place of research for postgraduate students interested in the Ph.D. study
branch Automation of Technological Processes
as a third level of study. After passing appropriate
exams and a dissertation defense, the successful
graduate receives a doctoral degree of science
(Ph.D)
•
•
•
The next two-year programme of study (MEng.
level) is called: Automatic Control and
Engineering Informatics. There are three main
specializations within the program:
A three-year bachelor program of study is called
Applied Informatics and Control and is it has
also established an option for physically disabled
students.
Three levels of study are available at the
department. We offer three-year programme
leading to degree of Bachelor of Engineering
(BEng) and next two-year programme leading to
the degree of Master of Engineering (MEng). The
first three semesters of study for BEng are
common for all branches on faculty and students
are registered as BEng students. The final decision
on which programme students take is reached at
the end of second study year.
DEGREE PROGRAMMES
The Department has a tradition of over 40 years. It
is specialized in the areas of system design and
programming of computer integrated production
systems CIM, MIS, CAD-CAM-CAQ concerning
engineering, industry and non-production areas.
HISTORY
The Department is active in research collaboration
with industry, concerning assisted learning
processes, and it co-operates with a number of
industrial companies in providing concrete
technical work connected with the designing and
implementation of measuring, diagnostics and
controlling systems for technological processes.
The department staff is involved in solving
a number of research and design problems related
to the control of technological, production and
economic processes. Number of domestic grants
and funds received every year prove the
R&D AND COOPERATION WITH
INDUSTRY
The work of our graduates is being applied in
industry, public services and business. Most new
graduates enter industry as design, development
and production engineers but many progress to
other areas such as sales, marketing and
management.
Some 10 to 15 per cent of our graduates stay at the
department to study for a higher degree, usually a
PhD by research, before going joining industry to
specialize in research and development or taking up
an academic career.
STUDENT CAREERS
The Department organizes innovation and retraining post-graduate programmes for workers
from industry. It provides also other kinds of
qualification courses concerning the application of
personal computer equipment, including computer
networks, measuring and automation techniques.
The Department is authorized to issue graduate
certificates.
•
Mathematics and physics analyses of
technological processes and machinery. The
outcome is the form of mathematics model
suitable for simulation.
1.System and project solution for measuring,
diagnostic and control systems.
The department offers services in the following
two areas of R&D:
SERVICES OFFER
department quality. Most of them are focused on
solving problems in the following areas of R&D:
1. The systematic design of measuring,
diagnostic and control systems.
2. The design and implementation of simulated
experiments, using simulated models and
program controlled apparatus (SIPRO,
MATLAB) for continuous and discrete
processes, linear and non-linear systems.
3. Synthetic structures for measuring, diagnostic
and controlling areas, including the design
and simulation of control algorithms for
technological processes and equipment
(thermics, electromechanics, hydraulics, etc.)
4. Technical-programmed
design
of
configuration and technical means for
implementing measuring and control systems.
5. Expert consultation in the area of automated
control, measuring, modeling and simulation
systems, computer programmed systems and
networks, and other disciplines.
6. The department closely cooperates with the
world leading software company – Microsoft
- in field of a software consultation, education
and development.
Experimental identification of industrial
processes and machinery followed by analyses
and processing of verified mathematics models
which are suitable for the synthesis of control
systems.
Design of analogue and digital filters
Design and evaluation of experimental
measurement in the area of technical
diagnostics of machinery and production
equipment.
Design and realization of experimental
simulations for continuous and discrete
processes.
Synthesis of the structure of measuring,
diagnostic and control systems.
Analyses, syntheses and solutions for the
optimization tasks.
Consultations and advise for control systems.
•
•
•
•
•
Selection and design of sensors, converters,
controllers and control systems.
Development and implementation of practical
applications based on chips INTEL 8051, PIC
and their extended versions.
Development and implementation of software
application based on the personal computers
PC with LAN connection.
Design of computer nets for real time data
acquisition and data processing (e.g. Power
consumption monitoring).
Development of customized software, its
installation, consumer education and software
maintenance.
2.Design of structures and devices for
measuring and control systems.
•
•
•
•
•
•
•
For further details, please, contact:
Head of the Department CSI:
Lubomír Smutný, Prof. Dr. RNDr.
Phone: +42 59 732 3484
Fax: +42 59 691 6129,
e-mail: [email protected]
http://www.352.vsb.cz/
Two years ago we ratified and signed a contract
with one of the biggest software firm in the world Microsoft Corporation - about cooperation in the
fields of development and education of their
technologies. There was set up an association of
three subjects: Microsoft CZ s.r.o, Intergraph CZ
s.r.o and Faculty of Mechanical Engineering, TUO.
The University Development Support Center
(UDSC), which is the official name of the
association, is the official education and consulting
center in the field of development tools and
development
technologies
of
Microsoft
Corporation. This is a considerable honor to our
university, because of relatively small number of
universities in the world having the same statute.
The fact of getting the contract is prestigious as
well.
UDSC is recently teaching several courses devoted
to Microsoft Visual C++ and Microsoft Visual
J++, programming with use COM technology,
programming with MFC library. It also very closely
cooperates with several big industry corporate in
the field of information technology.
Full information (in English) about faculty can be
found on the following web pages:
UNIVERSITY DEVELOPMENT
SUPPORT CENTER
Autor:
Kolektiv autorů
Editor:
Doc. Ing. Radim Farana, CSc., Prof. Dr. RNDr. Lubomír Smutný,
Ing. Petr Kočí, Ph.D.
Katedra, institut:
Katedra Automatizační techniky a řízení
Název:
Proceedings of XXX. Seminary ASR '05 “Instruments and Control”
Místo, rok, vydání:
Ostrava, 2005, 1. vydání
Počet stran:
538
Vydala:
VŠB - TECHNICKÁ UNIVERZITA OSTRAVA
Tisk:
Katedra ATŘ-352, VŠB-TUO, 17. listopadu 15, 708 33 Ostrava - Poruba
Náklad:
100 ks
352
Neprodejné
Text neprošel jazykovou úpravou, za věcnou správnost příspěvků odpovídají autoři.
Tato publikace ani její části nesmí být reprodukovány a přepisovány bez písemného svolení
vydavatele a autorů příspěvků.
ISBN 80-248-0774-2