docTechnicka dokumentace UMP-ALU
download 
Stížnost Podobné dokumenty
Technische Doku EU Montageeleme
Quantile Fε% (also fractile) denotes a
specific nominal value of a test series
below or above which there is only one
specific percentage ε of all measurement
values. The specification of such a qu...
Technicka dokumentace SLK-ALU
building period. They should be protected
from the weather and UV rays during
installation.
Technicka dokumentace K1-PH.pd
2) The permitted load may be increased to 0.6 kN with
unpunched solid bricks and/or unpunched solid sand-lime
bricks (no gripping recess).
Technicka dokumentace 2014
The easy-to-follow company size allows us to address customer wishes quickly and
flexibly at any time. Due to our large warehouse, we are able to implement large orders
on short notice, even during...
Technicka dokumentace UMP-ALU
apply to tensile load, transverse load and
oblique tensile load under all angles
pursuant to the general technical approval
Z-21.2-1204. The provisions of this approval
Technicka dokumentace UMP-ALU
apply to tensile load, transverse load and
oblique tensile load under all angles pursuant to the general technical approval
Z-21.2-1204. The provisions of this approval
Fasádní a rámové hmoždinky
duté tvárnice z lehčeného betonu 4)
lehčený beton
doporučená zatížení ve smyku Vrec [kN]
beton
plné cihly a plné vápenopískové cihly
Technicka dokumentace ZyRillo
Transverse force PQ per M6 screw: 0.20 kN
Transverse force PQ per M8 screw: 0.25 kN
Transverse force PQ per M10 screw:0.30 kN
Technicka dokumentace DoRondo
Tensile force PZ per M6 screw:
Tensile force PZ per M8 screw:
Tensile force PZ per M10 screw:
Letak - Dosteba
hliníkových profilů nebo fenolové
pryskyřice zaručují prvkům
DOSTEBA dlouhý život.
Pravidelné zkoušky a kontroly
garantují stále vysokou kvalitu
našich výrobků.
