docTechnicka dokumentace UMP-ALU
download 
Stížnost Podobné dokumenty
Technicka dokumentace K1-PH.pd
2) The permitted load may be increased to 0.6 kN with
unpunched solid bricks and/or unpunched solid sand-lime
bricks (no gripping recess).
Technicka dokumentace UMP-ALU
apply to tensile load, transverse load and
oblique tensile load under all angles pursuant to the general technical approval
Z-21.2-1204. The provisions of this approval
Technicka dokumentace 2014
cutting devices or the correct application in theory and practice and the proper installation
of our attachment elements.
Technicka dokumentace UMP-ALU
apply to tensile load, transverse load and
oblique tensile load under all angles
pursuant to the general technical approval
Z-21.2-1204. The provisions of this approval
Technicka dokumentace SLK-ALU
Stabilities are ensured based on the PU
hard foam and the foamed tensile rods
which connect the bottom steel consoles
to the top aluminium plate. There are no
metallic connections between the steel...
Technische Doku EU Montageeleme
Quantile Fε% (also fractile) denotes a
specific nominal value of a test series
below or above which there is only one
specific percentage ε of all measurement
values. The specification of such a qu...
Technicka dokumentace DoRondo
Tensile force PZ per M6 screw:
Tensile force PZ per M8 screw:
Tensile force PZ per M10 screw:
CH
povrchové úpravy. Na vyžádání též
Oprava a modernizace panelového bytového domu Bratří Čapků č.p
Dlažba ve vstupech byla v minulosti vyměněna. Nelze zaručit spolehlivost hydroizolace a její
návaznost na stěny.
Na podhledu hlavního vstupu je dřevěný izolační obklad, který je z požárně-bezpečnos...
