7.62mm (0.3INCH) DUAL DIGIT NUMERIC DISPLAY Features
Transkript
7.62mm (0.3INCH) DUAL DIGIT NUMERIC DISPLAY Part Number: DA03-11SRWA Super Bright Red Features Description z 0.3 INCH DIGIT HEIGHT. The Super Bright Red source color devices are made with z LOW CURRENT OPERATION. Gallium Aluminum Arsenide Red Light Emitting Diode. z EXCELLENT CHARACTER APPEARANCE. z EASY MOUNTING ON P.C. BOARDS OR SOCKETS. z TWO DIGIT PACKAGE SIMPLIFIES ALIGNMENTS & ASSEMBLY. z I.C. COMPATIBLE. z MECHANICALLY RUGGED. z STANDARD : GRAY FACE, WHITE SEGMENT. z RoHS COMPLIANT. Package Dimensions& Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted. 2. Specifications are subject to change without notice. SPEC NO: DSAB9971 REV NO: V.9 DATE: MAY/23/2007 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.L.LI PAGE: 1 OF 4 ERP: 1302000048 Selection Guide Part No. Dice DA03-11SRWA Iv (ucd) [1] @ 10mA Lens Type Super Bright Red (GaAlAs) WHITE DIFFUSED Min. Typ. 3000 13600 Description Common Anode Note: 1. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Super Bright Red λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 660 nm IF=20mA Super Bright Red 640 nm IF=20mA Spectral Line Half-width Super Bright Red 20 nm IF=20mA C Capacitance Super Bright Red 45 pF VF=0V;f=1MHz VF [2] Forward Voltage Super Bright Red 1.85 2.5 V IF=20mA IR Reverse Current Super Bright Red 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Super Bright Red Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 155 mA 5 V Reverse Voltage Operating / Storage Temperature Lead Solder Temperature[2] -40°C To +85°C 260°C For 3-5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. SPEC NO: DSAB9971 REV NO: V.9 DATE: MAY/23/2007 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.L.LI PAGE: 2 OF 4 ERP: 1302000048 Super Bright Red DA03-11SRWA SPEC NO: DSAB9971 REV NO: V.9 DATE: MAY/23/2007 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.L.LI PAGE: 3 OF 4 ERP: 1302000048 PACKING & LABEL SPECIFICATIONS DA03-11SRWA SPEC NO: DSAB9971 REV NO: V.9 DATE: MAY/23/2007 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.L.LI PAGE: 4 OF 4 ERP: 1302000048
Podobné dokumenty
58mm (2.3 INCH) 8x8 DOT MATRIX DISPLAY Features
z STACKABLE HORIZONTALLY.
z EASY MOUNTING ON P.C. BOARDS OR SOCKETS.
z MULTICOLOR AVAILABLE.
z MECHANICALLY RUGGED.
z STANDARD : GRAY FACE, WHITE DOT.
z RoHS COMPLIANT.
Description Package Dimensions 3.0mmx1.0mm RIGHT ANGLE
3. Specifications are subject to change without notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
1.8mm SOLID STATE LAMP Features Description Package
The Super Bright Red source color devices are made with
19.05mmx3.81mm LED LIGHT BAR Features Description Package
z CAN BE USED WITH PANELS AND LEGEND MOUNTS.
z RoHS COMPLIANT.
photo-interrupter - Electronique Diffusion
PHOTO-INTERRUPTER
*Electro-optical Characteristics(Ta=25°C)
Features T-1 3/ 4 (5mm) SUPER BRIGHT LED LAMPS Description
T-1 3/ 4 (5mm) SUPER BRIGHT LED LAMPS
L-53SRC-x SUPER BRIGHT RED
L-53SRD-x SUPER BRIGHT RED
Package Dimensions T-1 (3mm) RESISTOR LED LAMPS Features
Light Emitting Diode.
The Green and Super Bright Green source color devices
Kingbright Manufacturer datasheet and components documentation
Phosphide Green Light Emitting Diode.
The Yellow source color devices are made with Gallium
Arsenide Phosphide on Gallium Phosphide Yellow Light
Emitting Diode.