1.8mm SOLID STATE LAMP Features Description Package
Transkript
1.8mm SOLID STATE LAMP Part Number: L-2060SRD Super Bright Red Features Description z 1.8mm DIAMETER SMALL SIZE LED LAMP. The Super Bright Red source color devices are made with z ULTRA BRIGHTNESS IS AVAILABLE. Gallium Aluminum Arsenide Red Light Emitting Diode. z RELIABLE AND RUGGED. z VERSATILE MOUNTING ON P.C. BOARD OR PANEL. z AVAILABLE IN DIFFUSED LENS. z RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAC8705 REV NO: V.5 DATE: JUN/27/2007 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.CHEN ERP: 1101002693 Selection Guide Part No. Dice L-2060SRD Lens Type Super Bright Red (GaAlAs) RED DIFFUSED Iv (mcd) [2] @ 20mA Viewing Angle [1] Min. Typ. 2θ1/2 70 200 70° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Super Bright Red λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 660 nm IF=20mA Super Bright Red 640 nm IF=20mA Spectral Line Half-width Super Bright Red 20 nm IF=20mA C Capacitance Super Bright Red 45 pF VF=0V;f=1MHz VF [2] Forward Voltage Super Bright Red 1.85 2.5 V IF=20mA IR Reverse Current Super Bright Red 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Super Bright Red Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 155 mA 5 V Reverse Voltage Operating/Storage Temperature -40°C To +85°C Lead Solder Temperature [2] 260°C For 3 Seconds Lead Solder Temperature [3] 260°C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAC8705 REV NO: V.5 DATE: JUN/27/2007 PAGE: 2 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.CHEN ERP: 1101002693 Super Bright Red L-2060SRD SPEC NO: DSAC8705 REV NO: V.5 DATE: JUN/27/2007 PAGE: 3 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.CHEN ERP: 1101002693 SPEC NO: DSAC8705 REV NO: V.5 DATE: JUN/27/2007 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.CHEN ERP: 1101002693 SPEC NO: DSAC8705 REV NO: V.5 DATE: JUN/27/2007 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.CHEN ERP: 1101002693
Podobné dokumenty
Description Package Dimensions 3.0mmx1.0mm RIGHT ANGLE
3. Specifications are subject to change without notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
7.62mm (0.3INCH) DUAL DIGIT NUMERIC DISPLAY Features
z EXCELLENT CHARACTER APPEARANCE.
z EASY MOUNTING ON P.C. BOARDS OR SOCKETS.
z TWO DIGIT PACKAGE SIMPLIFIES ALIGNMENTS
19.05mmx3.81mm LED LIGHT BAR Features Description Package
z CAN BE USED WITH PANELS AND LEGEND MOUNTS.
z RoHS COMPLIANT.
58mm (2.3 INCH) 8x8 DOT MATRIX DISPLAY Features
z STACKABLE HORIZONTALLY.
z EASY MOUNTING ON P.C. BOARDS OR SOCKETS.
z MULTICOLOR AVAILABLE.
z MECHANICALLY RUGGED.
z STANDARD : GRAY FACE, WHITE DOT.
z RoHS COMPLIANT.
Features T-1 3/ 4 (5mm) SUPER BRIGHT LED LAMPS Description
T-1 3/ 4 (5mm) SUPER BRIGHT LED LAMPS
L-53SRC-x SUPER BRIGHT RED
L-53SRD-x SUPER BRIGHT RED
Package Dimensions T-1 (3mm) RESISTOR LED LAMPS Features
Light Emitting Diode.
The Green and Super Bright Green source color devices
Kingbright Manufacturer datasheet and components documentation
Phosphide Green Light Emitting Diode.
The Yellow source color devices are made with Gallium
Arsenide Phosphide on Gallium Phosphide Yellow Light
Emitting Diode.
photo-interrupter - Electronique Diffusion
PHOTO-INTERRUPTER
*Electro-optical Characteristics(Ta=25°C)