19.05mmx3.81mm LED LIGHT BAR Features Description Package
Transkript
19.05mmx3.81mm LED LIGHT BAR Part Number: KB-B100SRW Super Bright Red Features Description z UNIFORM LIGHT EMITTING AREA. The Super Bright Red source color devices are made with z LOW CURRENT OPERATION. Gallium Aluminum Arsenide Red Light Emitting Diode. z EASILY MOUNTED ON P.C. BOARDS. z FLUSH MOUNTABLE. z EXCELLENT ON/OFF CONTRAST. z CAN BE USED WITH PANELS AND LEGEND MOUNTS. z RoHS COMPLIANT. Package Dimensions& Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted. 2. Specifications are subject to change without notice. SPEC NO: DSAC0855 REV NO: V.9 DATE: MAY/12/2007 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.L.LI PAGE: 1 OF 4 ERP: 1334000228 Selection Guide Part No. Dice KB-B100SRW Iv (mcd) [1] @ 20mA Lens Type Super Bright Red (GaAlAs) WHITE DIFFUSED Min. Typ. 50 200 Note: 1. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Super Bright Red λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 660 nm IF=20mA Super Bright Red 640 nm IF=20mA Spectral Line Half-width Super Bright Red 20 nm IF=20mA C Capacitance Super Bright Red 45 pF VF=0V;f=1MHz VF [2] Forward Voltage Super Bright Red 1.85 2.5 V IF=20mA IR Reverse Current Super Bright Red 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Super Bright Red Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 155 mA 5 V Reverse Voltage Operating / Storage Temperature Lead Solder Temperature[2] -40°C To +85°C 260°C For 3-5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. SPEC NO: DSAC0855 REV NO: V.9 DATE: MAY/12/2007 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.L.LI PAGE: 2 OF 4 ERP: 1334000228 Super Bright Red KB-B100SRW SPEC NO: DSAC0855 REV NO: V.9 DATE: MAY/12/2007 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.L.LI PAGE: 3 OF 4 ERP: 1334000228 PACKING & LABEL SPECIFICATIONS KB-B100SRW SPEC NO: DSAC0855 REV NO: V.9 DATE: MAY/12/2007 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.L.LI PAGE: 4 OF 4 ERP: 1334000228
Podobné dokumenty
1.8mm SOLID STATE LAMP Features Description Package
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2. Luminous intensity/ luminous Flux: +/-15%.
7.62mm (0.3INCH) DUAL DIGIT NUMERIC DISPLAY Features
z EXCELLENT CHARACTER APPEARANCE.
z EASY MOUNTING ON P.C. BOARDS OR SOCKETS.
z TWO DIGIT PACKAGE SIMPLIFIES ALIGNMENTS
58mm (2.3 INCH) 8x8 DOT MATRIX DISPLAY Features
z STACKABLE HORIZONTALLY.
z EASY MOUNTING ON P.C. BOARDS OR SOCKETS.
z MULTICOLOR AVAILABLE.
z MECHANICALLY RUGGED.
z STANDARD : GRAY FACE, WHITE DOT.
z RoHS COMPLIANT.
Description Package Dimensions 3.0mmx1.0mm RIGHT ANGLE
with Gallium Phosphide Green Light Emitting Diode.
Features T-1 3/ 4 (5mm) SUPER BRIGHT LED LAMPS Description
T-1 3/ 4 (5mm) SUPER BRIGHT LED LAMPS
L-53SRC-x SUPER BRIGHT RED
L-53SRD-x SUPER BRIGHT RED
photo-interrupter - Electronique Diffusion
PHOTO-INTERRUPTER
*Electro-optical Characteristics(Ta=25°C)
Package Dimensions T-1 (3mm) RESISTOR LED LAMPS Features
Light Emitting Diode.
The Green and Super Bright Green source color devices
Kingbright Manufacturer datasheet and components documentation
1. All dimensions are in millimeters (inches).